Max Power 331981S 21-Inch Universal Gold Metal Mulching Lawn Mower Blade

Max Power 331981S 21-Inch Universal Gold Metal Mulching Lawn Mower Blade

  • Universal Replacement for 21-inch Cut Mowers
  • Commercial Gold Metal Mulching Blade with sharpened cutting teeth for a cleaner, finer cut
  • Greater cutting surface for increased mulching
  • Centrifugal air lift design for uniform chopping distribution
  • 1-inch Center hole with reducing washers in the following sizes: 3/8-inch, 7/16-inch, 9/16-inch, 1/2-inch, 5/8-inch, and 13/16-inch

Product Description

Replacement Universal Commercial Mulching Blade for 21-inch Cut Mowers 

Max Power 331731S 22-Inch Lawn Mower Blade For AYP/Poulan Mulcher 157101, 335256, 114886, 141114, 152202, 406713

Max Power 331731S 22-Inch Lawn Mower Blade For AYP/Poulan Mulcher 157101, 335256, 114886, 141114, 152202, 406713



  • Mulching Blade for 22-inch Cut Mower
  • Fits Craftsman, Husqvarna, Weedeater, Poulan
  • 5/8-inch center hole
  • Replaces #157101, 335256, 114886, 141114, 152202, 406713
  • Blade measures 2.25-inch x 22-inch

Product Description

Replacement Mulching Blade for 22-inch Cut Craftsman, Poulan, Husqvarna and other brand mowers manufactured by EHP/AYP. Replaces EHP/AYP #157101, 335256, 114886, 141114, 152202, 406713

Oregon 98-049 Lawn Mower Blade For MTD 21-Inch 742-0741

Oregon 98-049 Lawn Mower Blade For MTD 21-Inch 742-0741


  • Replaces OEM No.742-0741
  • Blade length (measured diagonally): 20.9-inch
  • Blade width 2.25-inch
  • Blade center hole diameter 0.710 x 0.930 Outer hole:0.32-inch

Product Description

Mulching blade. Fits MTD 1995 & newer decks. Also fits 300 & 900 series Cub Cadet walk behind mowers except models with cast aluminum decks. Specially designed center hole to replace six point star. Length: 21" Width: 2-1/4" Center Hole Diameter: 23/32" Star Thickness: .125" Diameter of Outside Holes: 19/64" Center to Center (outside holes): 2-1/2"   


I went looking for a replacement for my Yardman lawnmower. After checking a local shop specializing in tractors and such, I felt that $23 for a replacement blade was too much. After looking at Sears, I found a blade but it did not have the STAR CENTER CUT that the original blade has.

I was very happy to find this blade here at such a low price. I actually ordered two based on the part number included in the description as well as the picture. The only issue is that the picture is incorrect. The replacement blade does NOT have the STAR CENTER CUT but has been made to circumvent this by using a wider opening (thus the 4 of 5 stars - it would be 5 stars if the picture was clearer and the description was written better i.e. "This blade does not have the STAR CENTER CUT but will fit your lawnmower regardless. The special cut allows for the blade to be attached properly with no worries").


I did install the blade and it DID fit nicely. No worries or safety concerns from what I can tell. I mowed the lawn and it cut perfectly on both bagging and mulching mode. Enjoy! 

Black & Decker MB-850 19-Inch Lawn Mower Replacement Blade

Black & Decker MB-850 19-Inch Lawn Mower Replacement Blade


  • Designed for long-lasting performance and superior cutting
  • Fits Black and Decker models MM850, MM875, CMM1000, and CMM1200
  • Measures 19-inches long
  • Fits Black & Decker lawn mowers: #MM850, #MM875, and #CMM1000
  • Blade length: 19-inches

Amazon.com Product Description

The Black & Decker lawn mower replacement blade is a factory sharpened mulching blade designed for superior cutting and long-lasting performance. This 19-inch replacement blade fits Black & Decker lawn mowers: #MM850, #MM875, and #CMM1000. For the finest looking lawn, you need to have a sharp lawn mower blade; this replacement blade keeps your lawn mower working at its optimum level.  Read more >>>>

This review is from: Black & Decker MB-850 19-Inch Lawn Mower Replacement Blade (Lawn & Patio)
It was great to be able to find the item through Amazon.com that was not even available online at the Black & Decker site (was listed but cannot be ordered online). I could not find it anywhere locally in any retail or service stores. As good as the original blade that came with the mower. 

Buy This Product and Related Accessories  

Murray 20 3 in 1 Combo Lawn Mower Mulching Blade 7740043MA

Murray 20 3 in 1 Combo Lawn Mower Mulching Blade 7740043MA

  • Murray Part Number 774004; 7740043MA
  • Also Replaces Murray Part Numbers 672763E701 and 671921E701
  • 3N1 Combination Blade can be Used for Side Discharge, Mulching, or Bagging
  • Genuine Murray Part

From the Manufacturer

Genuine Murray 3N1 combination blade for Murray 20" mower applications. This combination blade is designed for side discharge, mulching, and bagging.
I am sure happy I found amazon.com.!!!!! the prices beat all that I check at local shops. Thank AMAZON..           Read more >>>>>

Poulan Pro PP23007 22-Inch Mulching Lawn Mower Blade

Poulan Pro PP23007 22-Inch Mulching Lawn Mower Blade


 


Product Features

  • 22-Inch Mulching Blade                    Read more>>>

From the Manufacturer

Poulan Pro 22-Inch Mulching Blade #PP23007. For the finest looking lawn, you need to have a sharp lawn mower blade; this replacement blade keeps your lawn mower working at its optimum level.

This review is from: Poulan Pro PP23007 22-Inch Mulching Lawn Mower Blade (Lawn & Patio)
This blade was inexpensive, and I hesitated to buy it since I didn't know if it would fit on my Craftsman mower. Installed fine and works great. No issues at all.  Read more>>>

Rotary Max Power 331714S 42-Inch Lawn Mower Blades For AYP/Poulan/Sears 134149

Rotary Max Power 331714S 42-Inch Lawn Mower Blades For AYP/Poulan/Sears 134149


  • Mulching Blade for 42-inch Cut Rider
  • Fits Craftsman, Husqvarna, Weedeater, Poulan
  • 5 point star center hole
  • Replaces #134149
  • Blade measures 2.25-inch x 21-inch

Product Description

Replacement Mulching Blades for 42-inch Cut Craftsman, Poulan, Husqvarna and other brand mowers manufactured by EHP/AYP. Replaces EHP/AYP #134149.

I ordered the "Rotary Max Power 331714S 42 inch Lawn Mower BLADES for AYP/ Poulan? Sears 13149" for $7.49.

When I ordered "BLADES" for a 42 inch mower I expected it would be the 2 blades required for the 42 inch mower. This says "BLADES" but you only get a (singular) blade. I have ordered lawn mower blades in the past and when the item says "Blade" I order 2, knowing that I need more than 1. This should be changed to say "Blade" on this item. I will now have to order another "Blades" to get 2 blades needed - this will cost another shipping charge.

Other than that the product is what I expected in quality. 
Read more >>>>

Oregon 95-900 96-900 21-Inch Gator Mulcher 3-N-1 Lawn Mower Blade For AYP/Poulan

Oregon 95-900 96-900 21-Inch Gator Mulcher 3-N-1 Lawn Mower Blade For AYP/Poulan



  • Replaces OEM No. 138971, 138498, 127843, 138498, 131323, 138791
  • Blade length (measured diagonally): 21-inch
  • Blade width 2.5-inch
  • Blade center hole diameter 0.630-inch Star Shaped
  • Width: 2.50in. And Thickness: .187in.


From the Manufacturer

Oregon is a world leader in mower blade manufacturing. Our patented Gator Mulcher 3-N-1 blades redirect the airflow allowing the grass clippings to be cut into small pieces. They will allow mowers not equipped with a mulching blade to reduce the volume of blade clippings and will reduce your fall leaf cleanup time. Unlike most mulching blades, they will allow you to bag your clipping and leaves, but because the pieces you will stop less often. Blades are made to a 26 point quality checklist that insures our blad.  Read more >>>

I purchased a pair of Oregon Gator blades to replace the worn/bent Sears blades on my Craftsman 42" riding mower. The Oregon Gator blades are MUCH heavier duty, thicker, and are on a whole different level than Sears blades when it comes to quality. These blades can hit stumps, rocks, and other debris and are bulletproof. No signs of wear at all after 5-6 mows of tall, thick grass.

A word of advice - make sure you install the blade properly. The teeth on the back of the blade must be pointed upward toward the top of the mowing deck. I made the mistake of installing them upside-down, and unfortunately mowed about 1/2 my lawn with the blades in the wrong position. Surprisingly the cut looked fine, but a few days later I noticed the badly torn grass blades, and knew that I installed the blades improperly. Dumb move, I know, but I had already taken off my other blades (which were bent/worn) and didn't bother to double-check the orientation of the cutting edge before installing the new blades. Just made the wrong assumption that the teeth should curve down toward the grass, and torn grass blades were the result.

These Oregon Gator blades would have received 5-stars, but I rated it 4-stars because there was no "grass-side down" marking on the blade, as is always the case with Craftsman mower blades. Otherwise, these blades I'm sure will outlast the mower as they are made of hardened steel and are much thicker gauge than other mower blades. Do NOT sharpen these blades out of the box, the protective layer of paint on the edge makes the blade feel dull, but it will wear off during the first mow, revealing the sharp edge. The blades are sharpened by precision at the factory for the most ideal cut, so by trying to sharpen the blades when they are new, the efficiency and effectiveness of the blade is reduced.

The Oregon 21" Gator blades will outlast most other mower blades sold at Sears and other stores, they are a smart investment as you'll save $$ by not having to sharpen/replace these every year.  
Read more >>>

Heavy Duty Commercial Mulching Blade to Replace 134149, 138971

Heavy Duty Commercial Mulching Blade to Replace 134149, 138971



  • Thicker steel and a better mulcher than OEM blade.
  • 21" Long, 2-1/2" Wide, .187" Thick, 5-Point Star Hole
  • Price is for one blade, order two for a set.

Product Description

Used on Craftsman, Poulan, Husqvarna, Wizard 42 inch decks. 21" long, 2 1/2" wide, 5 point star hole, .187" thick. (OEM blade is about .134" thick) Can be used as a mulcher even without the mulch plate. If used with the bagger only about 1/3 of the clippings go in the bag, the rest are mulched back in the grass and you wont see them (unless the grass is very high). Use only as pairs. 

This is an amazing blade!!! It will mulch like no other! Just be careful around windows...It threw a rock over my neighbor's 20' trailer'd ski boat and into a window about 50 feet away. oops 

Murray 40 3 in 1 Combo Lawn Mower Mulching Blade Set 4951033MA

Murray 40 3 in 1 Combo Lawn Mower Mulching Blade Set 4951033MA




  • Murray Part Number 495103; 4951033MA
  • Also Replaces Murray Part Numbers 95103E701; 92544E701, 456251, 95103-853, and 56251E701
  • 3N1 Combination Blade can be Used for Side Discharge, Mulching, or Bagging
  • Genuine Murray Part

From the Manufacturer

Genuine Murray 3N1 combination 2-blade set for Murray 40" mower applications. This combination blade is designed for side discharge, mulching, and bagging. 

Last year I ordered the same mower blades when they were worn. When it came time for new blades I would just resubmit the order on amazon. It is the factory part so that isn't the problem.

The real problem was the packing. There was NO packing material. If you can see the picture that is what was supposed to be in the box. When the 3 foot box arrived it had almost no weight. It turned out it was empty. Without packing material the roughly two foot blades were free to slide in the box. The UPS delivery driver believed it slide enough to shred the tape holding the box closed until it fell out somewhere. 

Rotary Max Power 331714S 42-Inch Lawn Mower Blades For AYP/Poulan/Sears 134149

Rotary Max Power 331714S 42-Inch Lawn Mower Blades For AYP/Poulan/Sears 134149


  • Mulching Blade for 42-inch Cut Rider
  • Fits Craftsman, Husqvarna, Weedeater, Poulan
  • 5 point star center hole
  • Replaces #134149
  • Blade measures 2.25-inch x 21-inch

Product Description

Replacement Mulching Blades for 42-inch Cut Craftsman, Poulan, Husqvarna and other brand mowers manufactured by EHP/AYP. Replaces EHP/AYP #134149.

I ordered the "Rotary Max Power 331714S 42 inch Lawn Mower BLADES for AYP/ Poulan? Sears 13149" for $7.49.

When I ordered "BLADES" for a 42 inch mower I expected it would be the 2 blades required for the 42 inch mower. This says "BLADES" but you only get a (singular) blade. I have ordered lawn mower blades in the past and when the item says "Blade" I order 2, knowing that I need more than 1. This should be changed to say "Blade" on this item. I will now have to order another "Blades" to get 2 blades needed - this will cost another shipping charge.


Other than that the product is what I expected in quality. 

Bought these for our Sears lawnmower, at a fraction of the cost of the Sears product - they fit and work great!

Set of 2 Gator 3-in-1 Mulching Blades to Replace John Deere Blades GX20249, GX20433, GY20567

Set of 2 Gator 3-in-1 Mulching Blades to Replace John Deere Blades GX20249, GX20433, GY20567



  • Price is for a set of 2 Geniune Gator 3-In-1 blades.
  • Hardened steel for extended blade life. All Oregon blades are austemper heat treated.
  • 42" John Deere, replaces GX20249, GX20433, or GY20567 (2pk)
  • 21 3/8" long, 2.50" wide, .187" thick.

Product Description

The Gator Mulcher 3-N-1 blade unique design has revolutionized the way blades mulch grass clippings. The angle of the Gator teeth redirects the air flow to keep the clipping directly in front of the cutting edge. The longer the clippings remain in front of the cutting edge, the finer the size of the clipping. These 3-N-1 blades can be used for mulching, bagging or side discharge mowing. 

The blades came very quickly. I have used them once so far. They mulch leaves and grass way better then any blade i have ever seen. I usually read 10,000 reviews before I purchase anything. Trust me you will not be disappointed!!! These blades are a must for overall use and FALL CLEAN UP!   

2 Gator Mulcher 3-in-1 Blades to Replace the 134149, 138971 Blade. Craftsman, AYP (set of 2)

2 Gator Mulcher 3-in-1 Blades to Replace the 134149, 138971 Blade. Craftsman, AYP (set of 2)


  • Price is for a set of 2 Geniune Gator 3-In-1 blades.
  • All Oregon blades are austemper heat treated.
  • 20% harder steel for extended blade life.
  • 21" long, 2.50" wide, .187" thick, star hole.

Product Description

Quality Oregon 3-in-1 mulcher blade to replace the 134149, 138971, 138498, or 127843 blade used on 42" AYP decks. Eliminates the need to bag in most cutting conditions, delivers excellent bagging performance when you need to bag, mows faster at higher speeds than the traditional mulching blade, has extended cutting area for improved cutting efficiency.

This is my second pair of Gator blades. Since I bought my first pair I will not use anything else. They are twice as thick as the original Sears blades and mulch leaves and grass into much smaller pieces.       Read more>>>

Set Of 2, Made In USA Replacement Mulching Blades For MTD 742-0616, 942-0616

Set Of 2, Made In USA Replacement Mulching Blades For MTD 742-0616, 942-0616



  • Price is for 2 quality Made In USA Rotary blades.
  • Replaces MTD 742-0616 or 942-0616 mulching blades.
  • 21-3/16" Long, 3 Wide, .150" Thick

Product Description

Replacement mulching version for the 742-0616, 942-0616 MTD, Yard Man, Cub Cadet, White, Troy Bilt, Bolens, lawn tractors with 42" decks. Specially designed & engineered to replace the MTD blades with a star shaped center hole. Center hole has H pattern, 21 316" long, outside two holes are 5/16", 3" wide, .150" thick. 

This review is from: Set Of 2, Made In USA Replacement Mulching Blades For MTD 742-0616, 942-0616
SAVE BIG $$$$$$$$$ ON THESE BLADES. WORK GREAT, AND WOULD RECCOMEND PURCHASE, TO ANYONE! ALMOST TWO FOR ONE LOW PRICE, AND SAME GAUGE STEEL AS OEM.

3 Gator 3-In-1 Mulching blades to replace MTD, Cub Cadet 742-04053A, 742-4053B, 742-04123. (Set of 3)

3 Gator 3-In-1 Mulching blades to replace MTD, Cub Cadet 742-04053A, 742-4053B, 742-04123. (Set of 3)

 

  • Genuine Gator blade, 20% harder steel for extended blade life
  • All Oregon blades are austemper heat treated.
  • 17 78" long, 2.50" wide, .187" thick.
  • Price is for a set of 3 blades.

 

Product Description

Quality Oregon 3-in-1 mulcher blade to replace the 742-04053A, 742-04053B, 742-04056, or 742-04123 blade used on 50" Cub Cadet, MTD ZTR decks. Eliminates the need to bag in most cutting conditions, delivers excellent bagging performance when you need to bag, mows faster at higher speeds than the traditional mulching blade, has extended cutting area for improved cutting efficiency.


I installed these blades the other day and took my mower out Saturday. It didn't seem any different from the factory blades as far as the cut was concerned. Then I hit some leaves left over from the fall. Mulch baby mulch. Wow, what a great job and chopping up those dead leaves. A far superior job then I got with the factory blades. If you have a lot of trees around your yard, these babies will make quick work spreading the leaves around without leaving a mess. Glad I got them. BTW: the delivery was fast and painless. Overall, a great deal.

Blades cut very nice and even better than OEM. May buy an extra set to swap out when these need to be sharpened.